48V Power Supply for LED, MAYTONI ULTRASLIM MAGNETIC

48V LED Power supply max 76.8W IP65

Name: 48V LED Power supply max 76.8W IP65
SKU: ELG-75-48
Availability: BackOrder

Out of stock status:

7-14 Days

Add to wishlist

Compare

180x63x35.5mm

45,00 €

Price without 24% VAT: 36,29 €

Add to quote

Meanwell ELG-75-48 Specifications

Model		ELG-75-48 □
Output	DC VOLTAGE	48V
	CONSTANT CURRENT REGION	48V
	RATED CURRENT	1.6A
	RATED POWER	200VAC ~ 305VAC
		76.8W
		100VAC ~ 180VAC
		60W
	RIPPLE & NOISE (max.)	250 mVp-p




	VOLTAGE TOLERANCE	±2.0%
	LINE REGULATION	±0.5%
	LOAD REGULATION	±0.5%
	SETUP, RISE TIME	500ms, 100ms/115VAC, 230VAC
	HOLD UP TIME (Typ.)	10ms/ 230VAC 10ms/ 115VAC(at full load)
Input	VOLTAGE RANGE	100 ~ 305VAC 142 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR	PF>=0.97/115VAC, PF>=0.95/230VAC, PF>=0.92/277VAC at full load
	TOTAL HARMONIC DISTORTION	THD< 20%(@load>=50%/115VC,230VAC; at load>=75%/277VAC)
	EFFICIENCY (Typ.)	90.00%
	AC CURRENT	0.7A / 115VAC 0.45A / 230VAC 0.38A/277VAC
	INRUSH CURRENT (Typ. )	COLD START 50A(twidth=350μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER	5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
	NO LOAD / STANDBY POWER CONSUMPTION	No load power consumption <0.5W for Blank / A / Dx / D2-Type Standby power consumption <0.5W for B / AB / DA-Type
	LEAKAGE CURRENT	<0.75mA / 277VAC
PROTECTION	OVER CURRENT	95 ~ 108%
	OVER CURRENT	Constant current limiting, recovers automatically after fault condition is removed
	SHORT CIRCUIT	Hiccup mode, recovers automatically after fault condition is removed
	OVER TEMPERATURE	Shut down output voltage, re-power on to recover
	OVER VOLTAGE	54-62V
	OVER VOLTAGE	Shut down output voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP	‘Tcase=-40 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	MAX. CASE TEMP.	Tcase=+85℃
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 60℃)
	VIBRATION	10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY &EMC	SAFETY STANDARDS	UL8750(type”HL”), CSA C22.2 No. 250.13-12; IEC/BS EN/EN/AS/NZS 61347-1, IEC/BS EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384;EAC TP TC 004;BIS IS15885(for 12A/12DA/12B/24A/24B/24DA/36A/36B/42A/42B/48A/48B only); IP65 or IP67; GB19510.1, GB19510.14; KC61347-1,KC61347-2-13 approved
	DALI STANDARDS	Compliance to IEC62386-101,102,(207 by request) for DA Type only
	WITHSTAND VOLTAGE	I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C ( at load>=50%) ; BS EN/EN61000-3-3; GB17743, GB17625.1; EAC TP TC 020; KC KN15,KN61547
	EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV);EAC TP TC 020; KC KN15,KN61547
Others	MTBF	3451.7K hrs min. Telcordia SR-332 (Bellcore) ;331.3K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	1806335.5mm (LWH)
	PACKING	0.8Kg;16pcs/13.4Kg/0.67CUFT

Meanwell ELG-75-48 Features

5 years warranty

Class 2 power unit

Typical lifetime> 50000 hours

Metal housing design with functional Ground

No load/Standby power consumption <0.5W

IP67/IP65 rating for indoor or outdoor installations

Constant Voltage + Constant Current mode output

Meanwell ELG-75-48 Applications

l LED architectural lighting

l Type HL” for use in Class l, Division 2 hazardous (Classified) location

SKU: ELG-75-48 Categories: 48V Power Supply for LED, MAYTONI ULTRASLIM MAGNETIC

Data

In stock (Vana-Tartu mnt 79A)	No
Brands	Mean Well
Input voltage	220V-277V AC
IP class	IP65
Out of Stock Delivery Time From Supplier	7-14 days
Max	76,8W
Power consumption/Max power	75W
Output voltage	48V
Length (mm)	180