DALI DT8 RGBW PWM dimmer IP67, 4 channel, 12-36V 4x5A

Product description	DALI DT81 address universal push-dim PWM dimmer IP67, 4 channel, 12-36V 4x5A, 48V 4x3A
GTIN – EAN	9009377095313
Features
Special features	Dimmer for RGB, RGBW as well as SC & CCT. Only install and connect when voltage-free!
Nominal voltage	12 – 36 V DC
Rated power	720 W
Protection class	IP67
Housing material	Plastic
Length in mm	180,0
Width in mm	75,0
Height in mm	38,0
Guarantee in years	2

• In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2.
• Built-in DALI-2 interface, DALI DT6 device
• Match all DALI systems in the market
• Manual /automatically DALI address setting
• DALI address digital indicate
• Four channels with same address
• To work with power repeater to expand output power unlimitedly.
• Waterproof grade:IP67

Setting DALI address
1.1. Press and hold down any of the two buttons until numeric digital display flashes, then release the button.
1.2. Click any of the two buttons once to select a digit, click again to change the digit until the desired DALI
address appears. Click first button to set “tens” position and second button to set “units” position. The address
can be set from 00~63.
1.3. Then press and hold down any of the 2 buttons until the numeric digital display stops flashing to confirm the
setting.
Note: DALI address can be manually assigned from 00-63-FF, by factory defaults, no DALI address is
assigned for the dimmer, and the display shows . Setting DALI address as will reset the dimmer to factory defaults.
Operation
DALI Controller
DALI
Master
Function introduction
Product Data
• DO NOT install with power applied to device.
• This device is IP67 rating and protected against damp environment.
Safety & Warnings
Important: Read All Instructions Prior to Installation

DALI Address Assigned by DALI Masters
DALI address can also be assigned by DALI Master controller automatically, please refer to user manuals of
compatible DALI Masters for specific operations.
Note: The digital display will show When the DALI master is assigning addresses.
Once an address is selected, all four channels’ address will be the same. For example, if the dimmer is
addressed to 22 on the display then CH1, CH2, CH3, CH4 will be the same address 22.