mini LED Driver 350mA 4W IP66 3-12V

Product description	LED constant current transformer 350mA, 1-4W, SELV
GTIN – EAN	9009377024832
Features
Rated power	4 W
Dimmable	No
Nominal voltage	220 – 240 V AC
Protection class	IP20
Housing material	Plastic
Weight in gramm	35
Length in mm	37,0
Width in mm	27,0
Height in mm	21,5
SELV	Y
Guarantee in years	5

The LED power supply is exclusively designed for
LED lamps used in indoors. It is a switch
mode power supply with 350mA constant output current. An
electronic protection circuit switches off the power supply in
case of a short circuit or overload in the secondary circuit,
overheat as well as open circuit. After the removing of the
faults, the LED power supply is resetting automatically for
operation again.
Important information for the installation:
The unit conforms to the directive 2004/108/EC for the
electromagnetic compatibility and the low voltage directive
2006/95/EC.
 The LED power supply can only be used with the
LED lamps.
 The power supply is only suitable for use in
indoors. Protect the LED power supply against
excessive heat (permissible operating
temperature range -20 to +45°C).
 The loads indicated on the power supply must
neither exceed nor below the following values:
1-4W
 Connect the LED lamps to the LED power supply
with correct polarity according to the schematic
drawing¹.
 The maximum length of the output cable to the
LED lamps should not exceed 2m in order to
meet the EMC standard.
 If then LED power supply is used for purposes
other than originally intended or it is connected in
the wrong way, no liability can be taken over for
possible damages.
Specifications:
Input voltage: 100-240V/AC 50/60Hz
Output current: 12V – 350mA
Rated power: 4W
Protection degree: IP66
Ambient temperature : +45°C
Case temperature: +80°C