Mini PIR motion sensor for installation in LED light profiles, 12-24V DC 3A

Product description	Mini PIR motion sensor for installation in LED light profiles, 12-24V DC 3A
GTIN – EAN	9009377171314
Features
EU declaration of conformity	Download
Special features	Detection radius maximum 3m, switches on when motion is detected (regardless of ambient light), switches off 30 seconds after last motion. Suitable for installation in luminaire profiles with an internal height of 8-11mm
Nominal voltage	12 – 24 V DC
Rated power	72 W
Protection class	IP20
Housing material	Plastic
Weight in gramm	13
Length in mm	50,0
Width in mm	11,0
Height in mm	12,0
Guarantee in years	5

PIR motion detector switch, connected to the low-voltage LED strip
» When people or objects enter the detection area, the light switches on. If they leave the detection area, the bar switches off after 30 seconds
» Max. 3A output current, max. output power 72W@24V
» Usually built into the aluminum housing of the lamp strip-placed on the end where comes power cable from power supply
» 3M adhesive on the bottom of the PCBA for easy installation and safety
»  high stability
» Widely used in table lamps, bedroom lamps, wardrobe lamps, etc

Input and output
Input Voltage 12 – 24V DC
output voltage 12 – 24V DC
output power Max. 36W@12V
Max. 72W@24V

Operating temperature Ta: -30°C ~ +55°C

Guarantee 5 years
Protection Reverse polarity

Sensor data
Detection range < 3m
Sensitivity angle 120°

Safety and EMC
EMC standard (EMC) EN IEC 55015:2019+A11:2020
EN61547:2009
EN IEC 61000-3-2:2019+A11:2021
EN 61000-3-3:2013+A11:2019
Safety standard EN 61347-1:2015+A1:2021
EN 61347-2-13:2014+A1:2017
Certification CE, EMC, LVD

Packaging
Dimensions L90x H130 mm
Gross weight 0.013 kg

Must consider:
1. 1. When installing, avoid sunlight shining on the induction switch to avoid interference signals.
2. Install the unit so that it will not be disturbed by heat sources such as cooktops, kitchen appliances that generate high temperature steam, walls and windows exposed to direct sunlight,
light strips, air conditioners, heaters, refrigerators, fireplaces and other places where air temperature changes are sensitive.
3. The installation should be done far removed from powerful engines, as the strong electromagnetic signal generated when the engine starts will interfere with the infrared sensor.
4. There should be no obstacles in the detection area (partition wall, furniture, large bonsai, etc.).
5. The power supply must be stable and must not fluctuate much.
6. install the mini sensor to profile when the power is off.
7. Pay attention to the polarity of the power input and LED output