Article number | 115801 |
---|---|
Product description | PIR motion detector black, 230V, max. 4A, 180° max. 10m detection radius, IP44, surface mounting |
GTIN – EAN | 9009377148279 |
Features | ![]() ![]() |
Connection to the circuit: Connect the motion detector between the mains cable and the luminaire (Fig. Note: Please note that the motion detector is not designed for operation on fluorescent lamps. Do not install the motion detector near heaters or air conditioners. This may impair the function or destroy the device! The motion detector must never be operated for a longer period of time without a loads. This will destroy the device and void the warrantyBefore the first function test, mount the motion detector firmly. To do this, use the bracket attached to the back. Now set the sliders on the bottom (Fig. 3) as follows: The time setting all the way to the left, to minimum, and the light sensitivity setting all the way to the right, to maximum. Now turn on the power at the main fuse like the light setting of the! Now the motion detector should respond and turn your light on and off. After closure of the installation, set the desired switching time and the desired light sensitivity on the two controllers on the underside. Please note that this is a highly sensitive device, which under certain conditions can be activated unintentionally. |
|
Nominal voltage | 220 – 240 V AC |
Protection class | IP44 |
Housing material | Plastic |
Length in mm | 120,0 |
Width in mm | 70,0 |
Height in mm | 80,0 |
Guarantee in years | 2 |
Technical data
» Detection angle approx. 180
» Connected load max. 1000Watt (resistive load)
» Operation at 230V / 50Hz
» Neat plastic housing
» Easy installation due to 3-pin connection!
» Operating temperature -20/+40°C, humidity max. 75%
» Brightness sensitivity <5Lux (adjustable 5-1000 Lux)
» Range 2-12m (adjustable by joint)
» Time delay adjustable 5 seconds – 8 minutes ± 3 seconds
» Inclination adjustable, installation height 1.5m-3.5m
» Splash-proof, protection class IP44
» please notice that sensitivity is not adjustable. Sensor detects motion that is visible to the sensor “eye”
There are no reviews yet.