PIR motion sensor IP20 300W white surface mounted

colour: white|detection angle: 360°|detection distance: 6 m|dimensions: 115 × 115 × 25 mm|IP rating: IP20|max. capacitive load: 1 000 W|max. resistive load: 2 000 W|packaging: 1 pc, small box|power source: 230 V~/50 Hz|sensitivity: <3 Lux|sensor type: PIR|switching time: min. 10 sekunds – max. 15 minutes

Infra-red motion sensors are used for automatic switching of lights in indoor areas.

The sensor responds to the heat of persons moving in the detection area.

On the intrusion of the detection field, a connected device is automatically switched on for a selected period.

Specifications:

Power supply: 220–240 V~, 50–60 Hz

Maximum load: 2000W traditional lamps, LED 300W

Switching time: 10 ± 3 s | 15 ± 2 min

Detection angle: 360 °

Light sensitivity: <3 LUX ~ 2 000 LUX (adjustable)

Detection range: max. 6 m (<24 °C)

Operating temperature: -20 °C to +40 °CRelative humidity: <93 %

Installation height: 2.2–4 m

Detection motion speed: 0.6–1.5 m/s

Power consumption: 0.69 W (stand by 0.67 W)

Enclosure: IP20Note:Inspect the product before use; if any part is damaged, do not use the product.

Before assembly, make sure power supply is disconnected.

In case of the device failure, do not try to repair or dismantle it.

Electromagnetic field Interference, a low temperature difference between the moving object and its surroundings, or a glare (e.g. by a strong light source) may result in the product malfunction.

Sensor function description: The PIR sensor receives infra-red waves emitted by objects found in the detection range. When an object moves in the detection range, the sensor detects the change and initiates a trigger command “Turn on the light” for the selected time.

Detection range (sensitivity) – up to 6 m. The “detection range” is an area defined by the detection angle and the minimum and maximum detected distance from the sensor.

Setting time (switch-off delay) – TIME 10 s (±3 s) to 15 min (±2 min)After the last motion detection, the count-down of the selected time is started. For the performance test, setting to the minimum value is recommended.

Twilight setting (light sensitivity) – LUX (3–2 000 lx) For the performance test, setting to the maximum value is recommended. The data provided is approximate and may vary depending on the location and installation height