Special features 5-pole through-wired, EN 2014/34/EU ATEX II 3G Ex nR IIC T6 Gc, EN 2014/34/EU ATEX II 3D Ex tc IIIC T85°C Dc
ATEX – Explosion protection
Explosive zones
A lamp designed for use in environments with a risk of explosion
In the chemical industry, you most often encounter an environment in which there is a risk of explosion. There is an increased risk of explosion when handling flammable chemicals . Such a risk may exist permanently or temporarily. In some cases, the creation of an explosive environment can only be expected exceptionally, for example in the event of an unexpected release of a flammable substance. Chemical plants and refineries are therefore divided into explosion zones. These may vary in different places. According to the degree of impending explosion risk, environments are classified into zones. The designation of zones is distinguished separately for explosive gases and vapors and separately for explosive dusts. Special environments with a risk of explosion include mining mines with the risk of a mine gas explosion.
Explosive zones for gases and vapors
The lamp is suitable following zones exist for explosive gases and vapors :
Zone 2
This is an environment in which there is only a small risk of an explosive atmosphere . Under normal operating conditions, the formation of an explosive environment cannot be expected, but this can occur, for example, in the event of an unexpected release of a flammable substance. In general, environments in which there is a risk of creating an explosive environment for a maximum of 10 hours per year are classified as zone 2.
| Product description | LED tri proof luminaire ATEX II 150cm, 54W, IP66, neutral white |
|---|---|
| GTIN – EAN | 9009377147661 |
| Features | ![]() ![]() |
| Special features | 5-pole through-wired, EN 2014/34/EU ATEX II 3G Ex nR IIC T6 Gc, EN 2014/34/EU ATEX II 3D Ex tc IIIC T85°C Dc |
| Nominal voltage | 220 – 240 V AC |
| Rated power | 54 W |
| Active power | 54 W |
| Luminous flux in lumen | 8310 lm |
| Color temperature | 4000K |
| CRI Ra | 80 |
| Beam angle | 120° |
| Beam angle type | fixed |
| Dimmable | No |
| Protection class | IP66 |
| Outdoor | Y |
| Permissible ambient temp. | -25°C – 55°C |
| Housing color | white |
| Housing material | Plastic |
| Weight in gramm | 4300 |
| Length in mm | 1572,0 |
| Width in mm | 145,0 |
| Height in mm | 111,0 |
| Suitable for fire-hazardous premises | Y |
| Shock and impact resistant | N |
| Lifetime L70|B10 | 53000 |
| Useful life L70|B50 | 80000 |
| Useful life L80|B50 in hours | 70000 |
| Guarantee in years | 5 |


LED Street Light HE75, 4000K, 1-10V dimmable with daylight and motion control, angle type III
End cap for profile MINI-AB12 grey with hole
Corner Connector for profile CORNER20/LAMP35/LAMP35 EDGE/cable port TUNNEL 90°, 4x set
Track Light Focus LED 12W 3000K 1000lm 36° black
LED Driver | 700mA | 6W 4-9V | IP65 | Flicker Free | Dimmable
Sys-Pro wireless RF motion detector MiniAMP with inverted function for UV-C, 9-24V
MiniAMP Wireless LED Touch DIMMER button, For LED strips 12-24V DC 3A Black
MiniAMP Door SENSOR Switch, 12-24V DC, 3A, Chrome
OrbitalCSR™ 30cm 3CCT & Wattage Switchable CSR IP66 Bulkhead3000K/3500/4000K Microwave Motion Sensor
LED CC transformer 100mA/180mA/270mA/350mA/440mA, 10W, Push/0-10V/DALI dimmable
MiniAMP DOOR SENSOR, 12-24V DC, 5A
Maytoni 1f track adaptor for pendant lamps black
Maytoni 1F surface track straight I-connector white
LED AQUA RGB+WWW flex stripe, 24V, 19W, IP68, 240 LED/m
Light Chain Power Adapter CONNACTA start 5m IP44 white
Maytoni 1F surface track L-corner connector black
AQUA LED RGW(2700K) 24V 19W/m IP67, 60LED/m 5m roll
5m LED CRI925 MiniAMP flex stripe, 12V, 6W, IP20, 2500K double-sided 30cm cable + maleAMP 






























There are no reviews yet.