ByPass

An LED bypass or “dimming stabilizer” a small block measuring only a few millimeters and is mainly used to counteract unevenness on the power grid. This problem can be identified by several points. Examples include afterglow LED lighting, uneven flickering when the light is on or an unstable dimming experience. In most cases, these problems arise from leakage voltage, a common problem in many households and businesses. A stabilizer is made to provide resistance to this problem, so that one can once again enjoy the full potential of the LED lighting present.

Features

• Counteracts leakage voltage due to induction transfer or surge voltage
• Suitable for rated voltage 100-240V
• Compact size: 25x25x10 mm

The Bypass is a device designed to work with 2-wire dimmer or switch with no neutral wire, to be used with LED bulbs or energy saving compact fluorescent lamps.

The Bypass prevents LEDs from flickering and turned off compact fluorescent lamps from glowing.

In 2-wire connection the Bypass reduces the minimum power of load required by the dimmer or switch for correct operation.

The Bypass provides powering of the dimmer or switch in case of controlling low loads.

Technical data: By pass
Type Accessories
Input voltage 100-240V
Power <1,4 Watt
IP rate IP20
Length 25 mm
Width 20 mm
Height 10 mm
Certification mark RoHS, CE
Warranty 5 years