3m roll. Can be cut every 5cm.
| Product description |
LED NEON RGB flex stripe B13H10 for tile profiles, 24V DC, 10W, 300cm, IP67, 140 LED/m |
| GTIN – EAN |
9009377155826 |
| Features |
     |
| Special features |
Separation point: 50mm with 7 SMD each | Pitch (light point center-center): 7,14mm | 1 unit (roll) = 3m | max. flex stripe length per infeed: 5m | length tolerance + thermal expansion: 1% | no cooling profile required | without adhesive tape! | silicone encapsulation | Special feature: 30cm 4-pole sheathed cable one-sided, white, connection on side | Note: vertically bendable (bending radius min. 60mm) | Flame retardant and flame resistant (IEC 60695-11-5), IK08 (IEC 62262), salt spray resistant (IEC 60068-2-11:2021), UV resistant (ASTM G154-2016) |
| Nominal voltage |
24V DC |
| Rated power |
10 W/m |
| Active power |
10 W/m |
| RGB light source |
Yes |
| Beam angle |
120° |
| Dimmable |
Yes |
| Protection class |
IP67 |
| Outdoor |
YES |
| Permissible ambient temp. |
-20°C – 40°C |
| Housing material |
Silicone |
| Potting material |
Silicone |
| LED chips per metre |
140 |
| LED/roll |
3000 |
| Properties of connection cable |
30cm 2-pin sheathed cable, single-sided, white, side connection, open wire without MiniAmp connector | NOTE: 2x1mm wide and high end caps, vertically bendable (min. bending radius 60mm) |
| Enclosed accessories |
Glue |
| Separation point (mm) |
50 mm |
| LED/disconnection point |
7,000000 |
| Pitch SMD (mm) |
7.14 |
| Cooling mass g/m |
0.00 g/m |
| Max. length per feed (m) |
5.00 m |
| Tape type |
without adhesive tape |
| Width in mm |
13,0 |
| Length in mm |
3000,0 |
| Height in mm |
10,0 |
| Lifetime L70|B10 |
38000 |
| Useful life L70|B50 |
57000 |
| Useful life L80|B50 in hours |
50000 |
| Guarantee in years |
3 |
Arvustusi pole veel