• In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2.
• Built-in DALI-2 interface, DALI DT6 device
• Match all DALI systems in the market
• Manual /automatically DALI address setting
• DALI address digital indicate
• Four channels with same address
• To work with power repeater to expand output power unlimitedly.
• Waterproof grade:IP67
Setting DALI address
1.1. Press and hold down any of the two buttons until numeric digital display flashes, then release the button.
1.2. Click any of the two buttons once to select a digit, click again to change the digit until the desired DALI
address appears. Click first button to set “tens” position and second button to set “units” position. The address
can be set from 00~63.
1.3. Then press and hold down any of the 2 buttons until the numeric digital display stops flashing to confirm the
setting.
Note: DALI address can be manually assigned from 00-63-FF, by factory defaults, no DALI address is
assigned for the dimmer, and the display shows . Setting DALI address as will reset the dimmer to factory defaults.
Operation
DALI Controller
DALI
Master
Function introduction
Product Data
• DO NOT install with power applied to device.
• This device is IP67 rating and protected against damp environment.
Safety & Warnings
Important: Read All Instructions Prior to Installation
• In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2.
• Built-in DALI-2 interface, DALI DT6 device
• Match all DALI systems in the market
• Manual /automatically DALI address setting
• DALI address digital indicate
• Four channels with same address
• To work with power repeater to expand output power unlimitedly.
• Waterproof grade:IP67
DALI Address Assigned by DALI Masters
DALI address can also be assigned by DALI Master controller automatically, please refer to user manuals of
compatible DALI Masters for specific operations.
Note: The digital display will show When the DALI master is assigning addresses.
Once an address is selected, all four channels’ address will be the same. For example, if the dimmer is
addressed to 22 on the display then CH1, CH2, CH3, CH4 will be the same address 22.


MiniAMP hidden HF motion detector, detection adjustable 0.5-5m, 5-24V DC, 3A
LED surface mounted luminaire profile HIDE ASYNC anodized aluminum, 200cm
Sys-Pro Mesh Signal Repeater, max. 30m, 12-24V DC / 100-240V AC
TAROS - TABLE LAMP LED 10W 900lm CCT 3000K-6500K DIM BLACK
200x13mm LED drywall Double Curve, black anodised RAL 9005 200cm
RGBW LED DMX wall panel MASTER black
Sys-One single Color 4 zone remote control with 2 scene memory
PIR motion sensor with sensor head, detection max. 3m, 230V, 500VA
ANSELL Vasco 120CM 50W LED 110° 4000K/4000K/6000K 5000lm
Voolumõõtja pistikusse max 3680W 16A
Phase angle (40-230V)/Push input signal to PWM controller, 1 channel, 12-48V DC 15A
Wireless touch LED controller, 1 channel, 12-24V DC 9A
Automaatse sisselülituse taimer/aegrelee IP44
LED strip radio PWM controller, 1 channel, 12-24V DC 8A, follow-up control
Sys-Pro 0/1-10V dimmer module for LED strips 5-48V
Lüliti ON/OFF Schneider Renova must
LED Mini PWM controller for installation under profile cover, 1 channel, 12-24V DC 3A
Sys-One wireless PWM controller IP66, 4 channel, 12-36V 4x5A, 48V 4x2A
LED Radio PWM controller, 1 channel, 12-24V DC 8A
LED dimmer 2W ~ 350W MainsDIM Triac
Cover COVER50 opal/satinized 200cm for profile HIDE SINGLE/DOUBLE/ TRIANGLE/ASYNC/ANGLE
MiniAMP juhtmevaba liikumisandur PIR+ RF vastuvõtja 12-24V DC 5A
Sys-One 1 zone recessed controller frameless with battery
Sys-One RGB+W 8 zone remote control black
Sys-One single Color 5 zone remote control
Sys-Pro Push input, radio output for switch / dimmer receiver, battery operated
Sys-Pro wireless RF motion detector MiniAMP, 9-24V
LED SIL830 flex stripe, 24V, 4.8W, IP66, warm white, 60 LED/m
Sys-One RGB 1 zone recessed controller frameless with battery
LED wireless 4 zones PWM dimmer, 1-4 channel, 12-24V DC, 4x5A 

























Arvustusi pole veel