Works with each DMX-master or with DMX wall panel Art nr. 214-135 or 214-139.
The 214-141 is a 5 channel constant current DMX512 decoder with 0.7A per channel output, which can be switched between DMX decoder mode and stand-alone mode by button. Once under stand-alone mode, the DMX master can adjust brightness of each channel and enter the fading operation mode. 3 channel, 4 channel or 5 channel output can be selectable. DMX address can be set freely and shown on the numeric digital display.


Seina/laevalgusti LED 15W 1550lm 4000K 120° D167 valge IP65 Utilite
Sys-Pro 0/1-10V dimmer module for LED strips 5-48V
LED recessed spotlight Sys-68, 10W, IP65, warm white, push or dali dimmable (excl. cover)
Clip connector with cable for 2 pole IP20 flex stripes with width 10mm and pitch spacing >7mm
4 zones remote control with 3 scene memories for 4 zones PWM dimmer No. 115484
LED constant current transformer 700/800/900/950/ 1050/1200mA, 40W, Push/0-10V/DALI dimmable, SELV
INTERLEDCS™ PRO 120CM 30W 3200lm pinnapealne/riputatav must
LED SIL830 flex stripe, 24V, 9,6W, IP20, warm white, 120 LED/m
Lüliti ON/OFF Schneider Renova must
RGBW LED DMX wall panel MASTER black
Components for surface-mounted track system Accessories for tracks Trinity
PIR motion sensor with sensor head, detection max. 3m, 230V, 500VA
Phase angle (40-230V)/Push input signal to PWM controller, 1 channel, 12-48V DC 15A
Sys-One 2 zone surface-mount button controller + battery 




















Arvustusi pole veel