Works with each DMX-master or with DMX wall panel Art nr. 214-135 or 214-139.
The 214-141 is a 5 channel constant current DMX512 decoder with 0.7A per channel output, which can be switched between DMX decoder mode and stand-alone mode by button. Once under stand-alone mode, the DMX master can adjust brightness of each channel and enter the fading operation mode. 3 channel, 4 channel or 5 channel output can be selectable. DMX address can be set freely and shown on the numeric digital display.


Laelamp Zon 30cm 36W 3000K 2610lm CRI90 valge
Pinnapealne magnetsiin Exility 26x52mm 2m
Components for surface-mounted track system Accessories for tracks Trinity
Clip connector for 2 pole IP68 flex stripes with width 12mm and pitch spacing >8mm
AURORA mPRO™ downlight 6W 3000K 600lm 60° IP65 dimmable
Wall lamp Basic form
LED Panel 30x120cm 25W CCT 3000K/4000K/5700K UGR>19
Slim Ø12cm 7W 3000K/4000K/5700K 90° 450lm must dim LED süvisvalgusti
Sys-One single Color 1 zone table controller + battery
LED paneel 30x120cm 40W 4000lm 3000K/4000K/6000K
LED driver | eldoLED ECOdrive 20CA-E1ZHP | 20W | triac dim.
LED RGB Linear10 flex stripe, 24V, 12W, IP20, 120 LED/m
LED pirn E14 5W G45 450lm CRI90 2700K dim
Mounting bracket 180 ° adjustable for LED hall light TOQ
LED Driver | eldoLED ECOdrive 241/A | 20W | 0-10V
LED dimmer ABB 6523UR 2-400W 




















Arvustusi pole veel