LED tri proof luminaires ATEX II 150cm, 53W, IP66, neutral white
Article number 115764
Dimmable No
Luminous flux in lumen 7280 lm
Beam angle 120
Special features 5-pole through-wired, EN 2014/34/EU ATEX II 3G Ex nR IIC T6 Gc, EN 2014/34/EU ATEX II 3D Ex tc IIIC T85°C Dc
Color temperature 4000K
CRI (RA) value 80
Nominal voltage 220 – 240 V AC
Rated power in Watt 53 W
Energy efficiency class E
Protection class IP66
max. ambient temperature in °C -25°C – 55°C
Length in mm 1572,0
Width in mm 145,0
Height in mm 111,0
Housing material Plastic
Guarantee in years 5
Lifetime L70|B10 53000
Housing color white
fire hazard areas No
Outdoor No
ATEX – Explosion protection
Explosive zones
A lamp designed for use in environments with a risk of explosion
In the chemical industry, you most often encounter an environment in which there is a risk of explosion. There is an increased risk of explosion when handling flammable chemicals . Such a risk may exist permanently or temporarily. In some cases, the creation of an explosive environment can only be expected exceptionally, for example in the event of an unexpected release of a flammable substance. Chemical plants and refineries are therefore divided into explosion zones. These may vary in different places. According to the degree of impending explosion risk, environments are classified into zones. The designation of zones is distinguished separately for explosive gases and vapors and separately for explosive dusts. Special environments with a risk of explosion include mining mines with the risk of a mine gas explosion.
Explosive zones for gases and vapors
The lamp is suitable following zones exist for explosive gases and vapors :
Zone 2
This is an environment in which there is only a small risk of an explosive atmosphere . Under normal operating conditions, the formation of an explosive environment cannot be expected, but this can occur, for example, in the event of an unexpected release of a flammable substance. In general, environments in which there is a risk of creating an explosive environment for a maximum of 10 hours per year are classified as zone 2.


DALI to 0-10V/1-10V signal converter
Clip connector with cable for 2 pole IP68 flex stripes with width 12mm and pitch spacing >8mm
Components for surface-mounted track system Accessories for tracks Trinity
LED downlight 10W 4000K 100° 1150lm IP44 12cm Uni-Fit™
Enlite PENDANT GU10 LED rippvalgusti valge
LED HEQ960 flex stripe High Bright, 24V, 17W, IP20, cold white, 160 LED/m
ANSELL Vasco 120CM 50W LED 110° 4000K/4000K/6000K 5000lm
Background module 12V RGB 3xLED 0.75W
Hämarasensor IP44 15A, must
HF-peidetav liikumisandur 220V max 300W LED
LED retrofit circuit board 160mm, 12W, with magnet, neutral white
Components for surface-mounted track system Accessories for tracks Trinity
LED Panel Busin. Line 600 UGR<19 2H/2H, 36W, frame white RAL 9016, neutral white, Push/DALI dimmable
LED CC transformer Push/0-10V/DALI dimmable, SELV 300-900mA (9-58V) max 30W
LED Panel Professional Line 600 UGR<19 4H/8H, 36W, frame white RAL 9016, neutral white, 1-10V dimm.
LED panel 30×120 25W CCT UGR<19 Backlit | excl. driver
Step-By-Step trepikontroller PIR sensoritega
Remote Wall Controller | For Tuneable white
Components for surface-mounted track system Accessories for tracks Trinity
Cover COVER48 black/matt 200cm for profile PURE12/PURE14/STAIRS13
DALI master control for 4 addresses, control via 4 push (close) button inputs
Universal-Push-Controller actuator for LED spots / stripes, 12-24V 8A, 36-48V 6A
FastFix LED Linear System S Module 1.5m 25-75W, 4000K, 25° left/25° right, DALI dimmable
Lüliti ON/OFF Schneider Renova must
LED recessed luminaire LUNA MiniAMP 4W, indirect light, 24V DC, white, warm white 2700K, dimmable
MAYTONI 1F siini otsakork must 




























Arvustusi pole veel