LED tri proof luminaires ATEX II 150cm, 53W, IP66, neutral white
Article number 115764
Dimmable No
Luminous flux in lumen 7280 lm
Beam angle 120
Special features 5-pole through-wired, EN 2014/34/EU ATEX II 3G Ex nR IIC T6 Gc, EN 2014/34/EU ATEX II 3D Ex tc IIIC T85°C Dc
Color temperature 4000K
CRI (RA) value 80
Nominal voltage 220 – 240 V AC
Rated power in Watt 53 W
Energy efficiency class E
Protection class IP66
max. ambient temperature in °C -25°C – 55°C
Length in mm 1572,0
Width in mm 145,0
Height in mm 111,0
Housing material Plastic
Guarantee in years 5
Lifetime L70|B10 53000
Housing color white
fire hazard areas No
Outdoor No
ATEX – Explosion protection
Explosive zones
A lamp designed for use in environments with a risk of explosion
In the chemical industry, you most often encounter an environment in which there is a risk of explosion. There is an increased risk of explosion when handling flammable chemicals . Such a risk may exist permanently or temporarily. In some cases, the creation of an explosive environment can only be expected exceptionally, for example in the event of an unexpected release of a flammable substance. Chemical plants and refineries are therefore divided into explosion zones. These may vary in different places. According to the degree of impending explosion risk, environments are classified into zones. The designation of zones is distinguished separately for explosive gases and vapors and separately for explosive dusts. Special environments with a risk of explosion include mining mines with the risk of a mine gas explosion.
Explosive zones for gases and vapors
The lamp is suitable following zones exist for explosive gases and vapors :
Zone 2
This is an environment in which there is only a small risk of an explosive atmosphere . Under normal operating conditions, the formation of an explosive environment cannot be expected, but this can occur, for example, in the event of an unexpected release of a flammable substance. In general, environments in which there is a risk of creating an explosive environment for a maximum of 10 hours per year are classified as zone 2.


Maytoni 1F süvistatava siini toiteots must
Sys-One 1 zone recessed controller + battery
Clip cable connection for 4 pole IP68 flex stripes with width 12mm and pitch spacing >8mm
Meanwell | LCM-40 | 350~1050mA | 40W | IP20 | 1-10V Dimmable
Clip cable connector 200cm for 2-pole IP68 flex stripes with width 12mm and pitch distance >8mm
Plafoonvalgusti Orbital 30cm 10W/14W/20W 3000K/3500K/4000K 1200-2400lm IP66 MS liikumisanduriga
Clip connector (max. 5A) for 4 pin IP68 flex stripes with a width of 12mm, pitch distance> 8mm
RGB+W PWM controller with local and remote control, 2 scene memory, 4 channel, 12-36V, 4x5A
LED CC transformer 100/180/270/350/440mA, 10W, Push/0-10V/DALI dimmable
MiniAMP viipesensor-lüliti 2m kaabliga 12-24V, max 5A, must
LED AQUA RGB+WWW flex stripe, 24V, 19W, IP68, 240 LED/m
Triac Dimmable driver for Switchlite Slim-Fit CS 6W recess light SWL
Corner connector for 10mm PCB flex stripe, 2 pole
AURORA WallE Down GU10 IP44 liikumisanduriga seinavalgusti, must
LED transformer 24V/DC, 0-100W, slim, Dali dimmable 




























Arvustusi pole veel