LED tri proof luminaires ATEX II 150cm, 53W, IP66, neutral white
Article number 115764
Dimmable No
Luminous flux in lumen 7280 lm
Beam angle 120
Special features 5-pole through-wired, EN 2014/34/EU ATEX II 3G Ex nR IIC T6 Gc, EN 2014/34/EU ATEX II 3D Ex tc IIIC T85°C Dc
Color temperature 4000K
CRI (RA) value 80
Nominal voltage 220 – 240 V AC
Rated power in Watt 53 W
Energy efficiency class E
Protection class IP66
max. ambient temperature in °C -25°C – 55°C
Length in mm 1572,0
Width in mm 145,0
Height in mm 111,0
Housing material Plastic
Guarantee in years 5
Lifetime L70|B10 53000
Housing color white
fire hazard areas No
Outdoor No
ATEX – Explosion protection
Explosive zones
A lamp designed for use in environments with a risk of explosion
In the chemical industry, you most often encounter an environment in which there is a risk of explosion. There is an increased risk of explosion when handling flammable chemicals . Such a risk may exist permanently or temporarily. In some cases, the creation of an explosive environment can only be expected exceptionally, for example in the event of an unexpected release of a flammable substance. Chemical plants and refineries are therefore divided into explosion zones. These may vary in different places. According to the degree of impending explosion risk, environments are classified into zones. The designation of zones is distinguished separately for explosive gases and vapors and separately for explosive dusts. Special environments with a risk of explosion include mining mines with the risk of a mine gas explosion.
Explosive zones for gases and vapors
The lamp is suitable following zones exist for explosive gases and vapors :
Zone 2
This is an environment in which there is only a small risk of an explosive atmosphere . Under normal operating conditions, the formation of an explosive environment cannot be expected, but this can occur, for example, in the event of an unexpected release of a flammable substance. In general, environments in which there is a risk of creating an explosive environment for a maximum of 10 hours per year are classified as zone 2.


Pildi/maalivalgusti Renoir 2xE14 antiikvalge
Valgusvoolik HORIZON 50m 3,2W/m 150W 6500K Külm valge IP65 230V DC, lõigatav 1m järel
AURORA ICE™ GU10 5W 520lm 38° 4000K DIM LED pirn
Ceiling lamp Dallas
MiniAMP PIR liikumisandur 2m kaabliga 12-24V, max 5A, kroom
Sys-One 1 zone surface-mount button controller + battery
Rippvalgusti DeMarkt Fabur E27 outdoor
AURORA G-LitePRO IP65 Ø10cm süvisvalgusti "drive-on" GU10
LED süvisvalgusti REVERSO 6W Ø8.1cm 3000K 470lm 40° IP44 valge dim
Põrandalamp ERICH 1xE14 1.55m kuldne/valge
LED recessed spotlight Sys-68, 10W, IP65, neutral white, push or Dali-dimmable (excl. cover)
3-PH track light 15W 38° 3000K 1400lm black CRI92
Sys-Pro single-color 3 zones built-in remote touch control + DMX output, black, 230V
Cover aluminium square 2 black for recessed wall light Sys-Wall68
*LED LINE® BRUSHED GU10 LEDpirni 9.2cm suunatav paigaldusrõngas, must
LED transformer MiniAMP 24V/DC, 0-30W, 200cm cable with flat plug, secondary 2 female sockets
Rippvalgusti laerosett, kaabel, E27 lambipesa ENZO kroom
LED paneel RUUT 12W 16.3x16.3cm 4000K 890lm 120°
Tekstiilkaabel valge 3×0,75mm² AWG18, müüme jooksevmeetriga
LED seinavalgusti UP&DOWN 11.5x9cm IP54 6.9W 392lm 2700K must dim
Components for surface-mounted track system Accessories for tracks Trinity
LED pirn E27 4.2W G45 Filament 2700K 470lm Dim
Sys-One wireless dimmer for dimmable 230V LED lamps/transformers, 100VA
DMX Receiver | 4 Channel x 8 Ampere | Constant Voltage
3F siini S1 voolujuhtiv ühenduskonnektor-siinisisene, must
Sys-Pro 4 Zones built-in Touch-Radio Operation 4x0-10V Output,White, 85-265V
Clip cable connection for 4 pole IP20 flex stripes with width 10mm, pitch spacing >8mm
SURFACE10 gen2 ending black /2pcs/ 




























Arvustusi pole veel