LED tri proof luminaires ATEX II 150cm, 53W, IP66, neutral white
Article number 115764
Dimmable No
Luminous flux in lumen 7280 lm
Beam angle 120
Special features 5-pole through-wired, EN 2014/34/EU ATEX II 3G Ex nR IIC T6 Gc, EN 2014/34/EU ATEX II 3D Ex tc IIIC T85°C Dc
Color temperature 4000K
CRI (RA) value 80
Nominal voltage 220 – 240 V AC
Rated power in Watt 53 W
Energy efficiency class E
Protection class IP66
max. ambient temperature in °C -25°C – 55°C
Length in mm 1572,0
Width in mm 145,0
Height in mm 111,0
Housing material Plastic
Guarantee in years 5
Lifetime L70|B10 53000
Housing color white
fire hazard areas No
Outdoor No
ATEX – Explosion protection
Explosive zones
A lamp designed for use in environments with a risk of explosion
In the chemical industry, you most often encounter an environment in which there is a risk of explosion. There is an increased risk of explosion when handling flammable chemicals . Such a risk may exist permanently or temporarily. In some cases, the creation of an explosive environment can only be expected exceptionally, for example in the event of an unexpected release of a flammable substance. Chemical plants and refineries are therefore divided into explosion zones. These may vary in different places. According to the degree of impending explosion risk, environments are classified into zones. The designation of zones is distinguished separately for explosive gases and vapors and separately for explosive dusts. Special environments with a risk of explosion include mining mines with the risk of a mine gas explosion.
Explosive zones for gases and vapors
The lamp is suitable following zones exist for explosive gases and vapors :
Zone 2
This is an environment in which there is only a small risk of an explosive atmosphere . Under normal operating conditions, the formation of an explosive environment cannot be expected, but this can occur, for example, in the event of an unexpected release of a flammable substance. In general, environments in which there is a risk of creating an explosive environment for a maximum of 10 hours per year are classified as zone 2.


LED CC transformer 100/180/270/350/440mA, 10W, Push/0-10V/DALI dimmable
13x10mm LED NEON RGB 3m 24V 10W/m IP67
MiniAMP on/off lüliti 2m/30cm kaabliga must
Sys-One single Color 4 zone remote control with 2 scene memory
DMX512 RDM 8/16 bit decoder, 1-5 channel, 12-36V 5x5A, 48V 5x1.5A
AR70 | 6 Watt | 3000K | 24° | dimmable | GU10
Wireless Touch RGB PWM controller with wireless remote control 2.4GHz, 12-24V DC 3x4A
ANSELL Vasco 150CM 60W LED 105° 3000K/4000K/6000K 6300lm
Step-By-Step trepikontroller PIR sensoritega
Laelamp SEDONA 90CM 4xE27 must
Power Strip SCHUKO with switch – 3 sockets, 1,5m
Sys-Pro 1xpush/4x1-10V input PWM dimmer, 4 channel, 12-36V DC 4x5A
Sys-One Radio PWM controller, 4 channel, 12-36V 4x5A, 48V 4x2.5A
Universal-Push-Controller actuator for LED spots / stripes, 12-24V 8A, 36-48V 6A
LED HEQ830 1230lm/m 24V 6W 3000K 180LED/m
LED street light bollard-2 60cm 9W sandblack, warm white
LED CRI930 Linear 48V flex stripe, 8W, IP68, warm white, 30 meters, 240 LED/m
Sys-One Radio/Push PWM Controller, 1 Channel, 12-36V 8A, 48V 4A
LED PWM transformer 24V/DC, 0-75W, IP20, Push/DALI dimmable
Phase angle (40-230V)/Push input signal to PWM controller, 1 channel, 12-48V DC 15A
LED transformer 24V/DC, 0-100W, slim, Dali dimmable 




























Arvustusi pole veel