PHILIPS Driver | Output Prog. 0.15 – 0,5A | 20W | Dali/push Dim

This Philips Xitanium LED driver can be set via SimpleSet in an output of 0.15 to 0.5A. SimpleSet is the latest technology from Philips which makes it possible to wireless adjust the LED driver via NFC to a desired output. This means that only one LED driver is needed for multiple applications.

Features

• Easily install the MultiOne Configurator Software.
• Connect the MultiOne SimpleSet Interface and choose the Xitanium LED program configuration.
• Place the LED Driver to be configured on the SimpleSet platform with USB connection (exclusive, available on request).
• The software displays a green check mark to confirm the configuration.
• Didn’t choose the right output? Reprogramming with SimpleSet can easily be done in the same way.

Not in possession of the MultiOne Software? Ask us to configure the SimpleSet drivers for you!

Technical data: Philips driver | output prog. 0.15 – 0,5A | 20W | DALI dim

• Input voltage220-240V
• Maximum Power20 Watt
• Output current150 – 500 mA
• Output voltage5 – 54 Volt
• DimmableYes
• ProtocolDALI, Push Dim
• Power factor>0.90
• Working temperature-20°C / +50°C
• IP rateIP20
• Length155 mm
• Width42,7 mm
• Height21,2 mm
• Cable lengthN/a
• Connection typeTerminal block
• Housing colorWhite
• Maximum temperature housing+80°C
• IsolationSELV
• Certification markCE
• Standards-
• Warranty5 years

LED drivers – mini and extreme small
Xitanium 20W/m 0.15-0.5A 54V I TD 230V
9290 034 23406
Enabling future-proof LED technology
Xitanium LED drivers are designed to operate LED solutions for general lighting applications. Reliability is enhanced by features that protect
the connected LED module, e.g. hot wiring, reduced ripple current and thermal derating. Most drivers feature central DC operation. In the
coming years LEDs will continue to increase in efficiency. With Xitanium LED drivers, flexibility in luminaire
design is assured thanks to an adjustable output current. Application-oriented operating windows offer stable lumen output and light quality
levels that specifiers and architects demand. The adjustable output current also enables operation of various LED PCB solutions from different
manufacturers.
Benefits
•High reliability underpinned by 5 year
warranty
• Future-proof flexibility –
application-oriented operating
windows enable LED generation and
complexity management
•Compatibility – can also be used for
other manufacturers’ modules or
OEMs’ own PCB designs
Features
•Operating windows – Output current can be adjusted
via the Philips MultiOne configurator (‘TD’ drivers) or
with a resistor outside the driver
•Multiple versions – DALI dimmable & programmable,
trailing-edge dimmable, fixed-current/fixed-output
trailing-edge dimmable, fixed-output, and
fixed-current/fixed-output
•Wide range of power ratings
•Choice of housing designs -linear housing for tracks in
‘3 in 1’ in design, conventional HID housings for down
and Spotlighting and WH housing for independent use
with strain relief and loop through
Application
•Retail