This Philips Xitanium LED driver can be set via SimpleSet in an output of 700mA to 1500mA. SimpleSet is the latest technology from Phillips which makes it possible to wireless adjust the LED driver via NFC to a desired output.
This means that only one LED driver is needed for multiple applications.
• Easily install the MultiOne Configurator Software.
• Connect the MultiOne SimpleSet Interface and choose the Xitanium LED program configuration.
• Place the LED Driver to be configured on the SimpleSet platform with USB connection (exclusive, available on request).
• The software displays a green check mark to confirm the configuration.
• Didn’t choose the right output? Reprogramming with SimpleSet can easily be done in the same way.
Not in possession of the MultiOne Software? Ask us to configure the SimpleSet drivers for you! sales@tronixlighting.com or +31 (0) 413 330 380.


ONE rippvalgusti E27 sokliga KÖIS must/pruun
Valgusvooliku IP44 start pistik adapteriga 1.5m
LED panel RIVI 30x60 surface mounted 24W without frame, dimmable with CCT change
AURORA EDLM™PRO RING GU10 sügav korpus 81mm
LED HEQ930 flex stripe High Bright, 24V, 12W, IP20, 3000K, 160 LED/m
LED Downlight 6W 550lm 60° White IP44 SpryteCS™ Switchlite
LED dimmer ABB 6523UR 2-400W
Maytoni Technical Alpha GU10 valgustikorpus Ø8.5cm valge
3 Phase Track | Black | Interior connector
TWISTLOCK GIMBAL OUTDOOR GU10 valgusti suunatav IP44 must
OSRAM ™ GU10 LED pirn RGBW 120° 4.5W 250lm puldiga
Zigbee | Receiver | 12~48V | RGB+TW/RGBW/RGB/TW/1..5CH.
FastFix LED linear system IP54 module 1.5m 25-75W, 5000K, 60°, 1-10V dimmable
LED LINE®GU10 LEDpirni 9.2cm suunatav paigaldusrõngas, must
Dimmable Driver for 24W Slim-Fit CS™ SWITCHLITE 























Arvustusi pole veel