DALI/PUSH DT6/DT8 1 address Multi-PWM dimmer, 5 channel, 12-24V DC 5x4A, 48V DC 5x3A

Product description	DALI DT6/DT8 1 address Multi-PWM dimmer, 5 channel, 12-24V DC 5x4A, 48V DC 5x3A
GTIN – EAN	9009377167447
Features
Manual	Download
Special features	PWM frequency adjustable: 1KHz|2KHz|4KHz|8KHz|16KHz. You have to factor in 2-5 mA consumption per Dali participant.
Nominal voltage	12 – 48 V DC
Rated power	20 A
Protection class	IP20
Housing material	Plastic
Length in mm	187,0
Width in mm	46,0
Height in mm	22,0
Guarantee in years	5

» 5-channel constant voltage DALI LED dimmer with digital display
» 1 DALI address, DT6 dimming / DT8-TC color temperature / DT8-RGB/ DT8-RGBW / DT8-RGB+CCT light type selectable
» In accordance with the DALI standard protocol IEC 62386-102, IEC 62386-207, IEC 62386-209 and in accordance with DALI products
from other international companies.
» The DALI address can be assigned manually and shown in the digital display or assigned automatically by the DALI master
» Connection with external push button switch for on/off, brightness, color temperature and RGB color setting
» PWM digital dimming, standard DALI logarithmic dimming curve
» PWM frequency 1000/2000/4000/8000/16000Hz selectable
» Overload / short circuit / reverse protection, recovers automatically

Technical parameters
Mechanical structures and systems
Input and output
Input Voltage 12-48V DC
Output voltage 5×(12-48)V DC
Output current 5×4A @ 12/24V
5×3A @ 36/48V
output power 240W@12V 480W@24V
540W@36V 720W@48V
Type of output Constant voltage

Dimming data
Input signal DALI, Push Dim
dimming range 1 -100%
dimming curve Logarithmic
PWM frequency 1000 / 2000 / 4000 / 8000 / 16000 Hz

Environment
Operating temperature Ta: -20 °C ~ +55 °C
Case temperature (Max.) Tc: +85 °C
protection class IP20

Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard EN 62368-1:2020+A11:2020
Radio equipment (RED) ETSI EN 300 328 V2.2.2
Certification CE, EMC, LVD

Warranty and protection
Guarantee 5 years
Protection Overload, short-circuit and
reverse polarity protection

Packaging
Size L190mm x W48mm x H25mm
Gross weight 0.152kg

Light type and PWM frequency setting
Setting the DALI address
1. Setting the light type
» Please set the light type according to the connected LED strip type
» Press the < and > push buttons simultaneously for 2 seconds to set the lighting mode, the digital display illuminates
» Briefly press the < or > button to switch 5 light types in succession: Single color (C1), Color temperature (C2), RGB (C3), RGBW (C4), RGB+CCT (C5)
» 10s without actuation, the light type setting is automatically terminated and the digital display stops glowing
2. Setting the PWM frequency
» After closure of the light type setting, press the < and > push buttons again for 2 seconds to set the PWM frequency; the digital display
illuminates
» Briefly press the < or > button to switch 5 types of PWM frequencies in succession: 1000Hz(F1), 2000Hz(F2), 4000Hz(F4), 8000Hz(F8),
16000Hz(FA)
» 10s without operation, the PWM frequency setting state will be automatically exited, the digital display will stop shining
1. Setting the DALI addresses using the buttons
» Press and hold the < or > push button for 2s, preparation for setting the start DALI address, the digital display illuminates
» Short press of the < or > push button to set the DALI address, long press of the < or > push button for continuous address change
» The DALI address can be assigned manually from 00-63-FF
» No DALI address is assigned to the dimmer at the factory and the digital display shows “FF”
» 10s without operation, automatically exit the DALI address setting status, the digital display stops glowing

The DALI address can also be assigned automatically by a DALI master.
See the operating instructions for the compatible DALI master under specific operations. The digital display shows “AU” when the DALI master
assigns the address, then the digital display shows the start DALI address “xx”, xx is from 00 to 63.
Push button function
1. Single color dimming type:
» Short press: Switch light on/off
» Long press (1-6s): Stepless dimming, with each additional long press the brightness goes in the opposite direction, dimming range 1%-
100%
» Double-click: Switch between 10% and 100% brightness
2. Color temperature dimming type:
» Short press: Switches the light on/off
» Long press (1-6s): Standard brightness setting, with each additional long press the light intensity goes in the opposite direction, dimming
range 1%-100%
» Double click: Switch between three levels of color temperature (warm white, neutral white, cool white) in sequence.at the same time, enter
the state of long press (1-6s) to adjust the color temperature.After 5s no operation, it will automatically exit color temperature adjustment
state
3. RGB dimming type:
» Short press: Turns the light on/off
» Long press (1-6s): Standard brightness setting, with each additional long press the light intensity goes in the opposite direction, dimming
range 1%-100%
» Double-click: Switch between colored light (RGB) and mixed white light (current colored light + 50% saturation).At the same time, you can
adjust the colored light or saturation by pressing and holding (1-6s).After 5s without operation, the device automatically exits the colored
light or saturation setting state
4. RGBW dimming type:
» Short press: Turns the light on/off
» Long press (1-6s): Standard brightness setting, with each additional long press the light intensity goes in the opposite direction, dimming
range 1%-100%
» Double click: Switch between color light (RGB) and white light (W), at the same time, long press (1-6s) to adjust the brightness of color light
or white light. After 5s no operation, the settings are automatically exited Colored light or white light is set
5. RGB+CCT dimming type:
» Short press: Switches the light on/off
» Long press (1-6s): Standard brightness setting, with each additional long press the light intensity goes in the opposite direction, dimming
range 1%-100%
» Double-click: Switch between color light (RGB) and color temperature, at the same time, long press (1-6s) to adjust color light or color
temperature. After 5s no operation, the settings are exited automatically, color light or color temperature is set
Safety and warnings
DO NOT install the device under voltage!
Do NOT expose the device to moisture!